![]() ![]() ![]() 1 microphone connected directly or by cable.1 speaker connected directly or by cable.1 jumper slid onto the board see the cover printing.4 terminals slid onto the board see the photo.The cabin audio unit package contains (assembled): There must be free space of at least 65 x 130 x 20 mm behind the panel.Ĭheck the product for completeness before installation.The above mentioned elements have been located as required by the applicable regulations.illuminated pictogram “Connection made”.illuminated pictogram “Request received”.The panel has to be equipped with the following obligatory elements:.The panel has to be installation-ready, including speaker perforation.No LED is illuminated upon upgrade and the audio unit is ready for use.The red LED on the back side is permanently on. The yellow and green LEDs flash to indicate audio unit upgrading.The yellow and green LEDs are on (request received and connection confirmed) and the red LED is illuminated on the back side to indicate audio unit initialisation.The yellow LED starts flashing when the call has been confirmed to indicate camera image downloading.The green LED is on to indicate call confirmation (connection confirmed).The yellow LED is illuminated to indicate the call setup progress (request received). ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |